Biofa Aqua Satin Hard Oil 8045

Implementation :

1. Substrate preparation:
The substrate must be dry, absorbent and free from grease stains and dirt.

2. First coat:
On highly absorbent substrates, or on surfaces whose hue is to be intensified, apply SOLVENT-FREE HARDENER 3755 or COLOROL 2110-2111 beforehand.
Stir the oil well and apply thinly and evenly with a velvet paint roller, brush or spray gun.
Caution: AQUA HARD OIL dries quickly and must be applied quickly without any joints.

3. Topcoat:
If undercoated with SOLVENT-FREE HARDENER or COLOROL, apply AQUA HARDENER after 16-24 hours as described above.
If you have undercoated with AQUA HARD OIL, the second coat can be sanded and applied after approximately 6 hours.µ

Use only in well-ventilated areas.