Biofa Hard wax for floors 2060

Instructions for use

1. Substrate preparation: The substrate must be sanded, dry, clean, free of dust and grease (if necessary, degrease with BIOFA 0500 DILUANT).
   It is recommended to apply a coat of BIOFA 3755 solvent-free Hard Primer, then sand before applying the wax.
2. Application: ready-to-use product.
   Apply a very thin coat of wax with a lint-free cloth and spread evenly.
   Polish after 3 to 6 hours (wool, white pad).
   Heavy-duty surfaces: apply a 2nd coat.
   Important: test first.
   During application and drying, ensure good ventilation.
   Do not work below 16°C!
3. Material cleaning: immediately after use with BIOFA 0500 thinner.
4. Surface cleaning and maintenance: dry with broom, cloth, mop or vacuum cleaner.
   For wet cleaning, mop after adding a capful of mild, pH-neutral soap such as Nacasa BIOFA 4010.

Drying

Dry and polishable after 3 to 6 hours.
Thoroughly dry after 24 hours.