Biofa Undercoat Solimin White 3046

Instructions for use

1. Substrate preparation: the substrate must be porous, clean and firm.
   On all interior mineral surfaces, cement, concrete, lime plaster, plasterboard, etc., remove old latex, oil or synthetic paints.
   Old mineral paints must be cleaned and non-adherent parts removed.
   Close micro-cracks. Damaged surfaces (roughcast, micro-cracks, etc.) should be repaired with mineral products.
   Traces of crystallization on bricks or concrete should be neutralized or removed mechanically.
   Surfaces that have been stripped should be lightly sanded (60 to 100 grit) and dusted, then cleaned with a damp cloth (lukewarm water).
   Porous surfaces should be treated with Biofa 1440 Fixative after 24 hours. Remains of wallpaper paste may cause adhesion problems.
   Important note:Alkali-sensitive surfaces should be protected (marble, stone, glass, etc.).
   It is possible, when treating different surfaces with microporous paint systems, for traces of nicotine, lignin, rust, etc. to reappear after painting.
   The substrate should therefore be tested.
   The use of natural raw materials may give off a characteristic odour.
2. Application: Stir well. Add 3 to 5% water or BIOFA 1440 fixative if necessary.
   The product can be tinted with BIOFA 1410-1419 tinting concentrates for silicate paints.
   Important: apply regularly!
   Work the edges 'wet in wet'!
   Use soft rollers that can pick up enough paint!
   Try it out!
   During application and drying, ensure good ventilation.
   Do not apply if air or substrate temperature is below +5°C.
   Mix thoroughly before use.
3. Tool cleaning: clean tools immediately with BIOFA 0600 brush cleaner, then with soapy water, followed by clear water.
   Dry stains can be removed with BIOFA 4060 Natole.

Drying

Can be recoated after 6 hours.

Packaging

White:

• 1l (5-6m²): €14.58
• 4l (20-24m²): €48.18
• 10l (50-60m²): €108.13

Off-white (NCS S, RAL or Nature):

• 1l (5-6m²): €16.12
• 4l (20-24m²): €53.02
• 10l (50-60m²): €117.73

Composition

Water, chalk, titanium dioxide, mineral powder mix of chlorite, glimmer and quartz, pure acrylate, potassium silicate, sodium phosphonate, starch, potassium methylsiliconate, polyether derivatives of fatty acids, ammonia complex.

Consumption

For normal porosity: 160-200ml/m² or 5-6m²/litre.

Storage

Store in a cool, frost-free place. Open cans should be used as soon as possible. Original closed cans are stable for at least one year. Caution: exposed to heat, product may thicken.

Safety advice

Natural products should be kept out of the reach of children.
Alkaline product. Protect eyes and skin, glass surfaces, natural stone, aluminum, wood and lacquer. If splashed in eyes, rinse thoroughly. In case of splashes on lacquered, metallic, plastic-coated, glass or ceramic surfaces, etc., wash immediately with water.
Store in a cool, dry place, away from frost.
Keep out of reach of children.
Do not breathe spray mist.

Recycling

Do not dispose of residues down the drain or in the ground.
Liquid product should be disposed of in paint containers or in accordance with local regulations.
Small quantities and dry rags can be disposed of in household waste.
Empty, dry packaging should be disposed of at a waste disposal center.
Unfit packaging must be treated in the same way as the product!

VOC EU-max. (cat. A/g) : 30 g/L (2010)
3046 contains max. 0 g/L

Recycling: Liquid waste EAK 080112