Instructions for use

1. Substrate preparation: the substrate must be carefully sanded, dry (wood - 12% humidity), clean, free from grease stains and prepared according to the rules of the trade. hygrometry), clean, free from grease stains and prepared according to good engineering practice.
   Remove loose paint.
   Wood species rich in tannin (e. g. oak) or exotic woods (e. g. Framiré) should be washed. Wash with white spirit or denatured alcohol.
   Sand with P120.
2. Priming: impregnate bare wood with BIOFA Lacquer Primer 1210.
   On iron, zinc or galvanized metals, first apply a coat of anti-rust paint. Sand with P180-220 after complete drying.
3. Intermediate/finishing coat: stir lacquer well.
   Apply with brush or roller in two coats (wet film thickness 70-80 micrometre). Use brushes with long, soft bristles for wood stains or acrylic products.
   Intermediate sanding with 220.
   Important: do not apply in cold and/or damp weather (max. 80% r. h.) and at temperatures below freezing.)and temperatures below 12°C. This can lead to long drying times and paint film disorders.
   Carry out a preliminary test.
   During application and drying, ensure good ventilation.
   Caution: during breaks, let brushes soak in lacquer, do not rinse or soak in water.
4. Cleaning equipment: place tools in BIOFA 0600 Brush Cleaner for one day, then rinse thoroughly; use BIOFA 0500 thinner if cleaning is insufficient.

Drying

Dust-free after 6 to 8 hours (20°C / 50-55% humidity).
Recoatable after 24 to 48 hours and thoroughly dry after 7 days.

Composition

Water, titanium dioxide, chalk, linseed oil, rosin resin ester, silicates, fatty acid ester and alcohol, silicic acid montmorillonite, cobalt, zirconium and calcium octoate drier, food preservative.

Coverage

Brush/Roller: 80 to 100 ml/m². Coverage 10-12 m²/liter.

Storage

Store cool, dry and tightly closed. Skin may form in unopened containers. Transfer leftovers to smaller containers. Passoir if necessary.

Safety instructions

Soak rags, sponges and clothing in water before allowing to air dry (risk of self-ignition). The product itself is not self-igniting.
Natural products should also be kept out of reach of children.
Contains cobalt octoate. May cause allergic reactions.
Sanding: wear a fine-dust mask.
A characteristic odor may emanate from the use of natural raw materials.
Use in well-ventilated areas.

Recycling

Empty packaging and liquid residues should be disposed of at a waste disposal center in accordance with local regulations. Dry residues can be disposed of with household waste. Liquid waste EAK 080111


VOC EU-max. (cat. A/d) 130 g/L (2010)
5111 contains max. 2 g/L