Mathys Paracem 301 Semi-Mat White

DESCRIPTION
Paint based on acrylic-styrene copolymer resins for exterior or
interior use.

RECOMMENDED USE
On new or old substrates such as masonry, cement or plaster rendering, concrete, bricks,
Gyproc partitions and wood panels.

TECHNICAL DATA
Density (g/cm³): 1.5
Gloss level: Semi-matt
Gloss level at 60º: ± 5%
Dry extract by weight: 64%
Dry extract by volume: 46% Density (g/cm³): 1.5 Gloss level: Semi-matt Gloss level at 60º: ± 5% Dry extract by weight: 64% Dry extract by volume: 46% Density (g/cm³): 1.5

DRYING TIME AT 20°C/HR 50%
Touchable: ± 40 minutes (10 m²/l)
Handling: ± 2 hours (10 m²/l)
Recoatable: ± 4 hours (10 m²/l)
Through-Hardening: ± 1 day

RECOMMENDED WET FILM THICKNESS
± 100 μm (cons.: 10 m²/l)

RECOMMENDED DRY FILM THICKNESS
± 45 μm (cons.: 10 m²/l)

THEORETICAL CONSUMPTION
7 - 10 m²/l per coat

PRACTICAL CONSUMPTION
Yield depends on many factors, such as the roughness or porosity of the substrate and
product losses during application.

SURFACE PREPARATION
The substrate must be sufficiently dry and stable, and thoroughly clean. If moss is present, treat
beforehand with an anti-foam product. On porous substrates, apply a
coat of Parafix or Pegafix / Paracem (25 / 75). On very smooth bricks, apply
a coat of Noxyde, diluted with 25% water, or a coat of Pegalink.
After cleaning, impregnate old chalking paintwork with a coat of
Fixonal or Pegafix.
To isolate stains, graffiti and/or for very
fast coverage on all substrates, indoors or outdoors, use
primers Zinsser Bulls Eye 123 or 123 Plus, or Cover-Stain.
Fill holes, gaps or cracks with Elastofill. Where necessary, level
surfaces with Pegaflex. Lightly sand and dust off. Then apply 1 to 2
coats of Paracem.

USE PRECAUTIONS
To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

APPLICATION CONDITIONS

- For exteriors: use undiluted.
- For interiors: dilute with 5 to 10% water or better with 5% Fair-Decor
- Minimum temperature 5°C , maximum R. H. 80%.

APPLICATION & DILUTION: BRUSH

Apply with a flat brush.

APPLICATION & THINNING: ROLLER
Application with wool roller.

APPLICATION & DILUTION: AIRLESS GUN
Nozzle: 013 - 018 / Pressure: 180 bar

APPLICATION & DILUTION: PNEUMATIC SPRAYGUN
Dilute with water (3 - 5%).

CLEANING OF EQUIPMENT / SHOES
Water.

SAFETY DATA
VOC content: 25 g/l max.
VOC category: A/c
VOC limit: 75 g/l (2007) / 40 g/l (2010)
Safety notes: See safety data sheet and information on
the label.

LIFETIME
2 years minimum from production date (indicated on can) for unopened
cans, stored in dry, well-ventilated premises, away from direct sunlight, and at
temperatures between 5 and 35°C.