DESCRIPTION
Multi-purpose primer based on waterborne acrylic resins.

RECOMMENDED USE
Bonding on many substrates: wood, plaster, bricks, concrete and especially
smooth and difficult substrates: galvanized steel, copper, zinc, polycarbonate, hard P. V. C., Pegagraff
Hydro,etc. INTERIOR and EXTERIOR

TECHNICAL DATA
Density (g/cm³): 1.2 - 1.3
Gloss level: Satin
Gloss level at 60º: Satin: ± 20%
Dry extract by weight: ± 52%
Dry extract by volume: ± 37

DRYING TIME AT 20°C/HR 50%
Touchable: 20 min
Handling: 1 h
Recoatable: After 24 h with waterborne paints.
Decorative overcoating with alkyd lacquers must first be tested

.
Through-hardening: 2 days

RECOMMENDED WET FILM THICKNESS
100 µm
RECOMMENDED DRY FILM THICKNESS
36 µm
THEORETICAL CONSUMPTION
± 10 m²/l
PRACTICAL CONSUMPTION
Yield depends on many factors such as substrate roughness or porosity and
product losses during application.

SURFACE PREPARATION
Smooth surfaces do not normally need to be roughened by sanding. Simply clean
and/or degrease to ensure good adhesion.

USE PRECAUTIONS
To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

APPLICATION CONDITIONS
> 5°C, < 80% R. H.

APPLICATION & DILUTION: BRUSH
Apply undiluted. Any type of brush can be used.
APPLICATION & DILUTION: ROLLER
Apply undiluted with a lacquer roller (application with other types of roller
is not recommended).
APPLICATION & DILUTION: AIRLESS GUN
Nozzle: 011 / Pressure: 200 bar.
Apply undiluted.
APPLICATION & DILUTION: PNEUMATIC GUN
Apply undiluted.

CLEANING EQUIPMENT / SHOES
Water.

REMARKS
Test squaring intact on surfaces mentioned.
In case of doubt on surfaces not mentioned, test squaring after 2 days of drying,
especially on old paints.

SAFETY DATA
VOC content: 45 g/l
VOC ready for use: 45 g/l
VOC category: A/i
VOC limit: 140 g/l
Safety notes: See safety data sheet and information on
the label.

LIFETIME
2 years minimum from production date (indicated on can) for unopened
cans, stored in dry, well-ventilated premises, away from direct sunlight, and at
temperatures between 5 and 35°C.