FEATURES-USE

-has exceptional adhesion to a variety of substratessuch as wood, ceilings, cement, brick and concrete, but also hard PVC pipes, polyester, coatable hard plastics, polycarbonate, ceramics, galvanized galvanized metal, zinc, aluminium and glass, tilesage( after degreasing with acetone) etc., ... Also suitable as as an adhesion primer on old coats of varnish or enamel, after matting.l, after matting.

-overcoatable with acrylic and alkyd enamels

-Self-crosslinking emulsion acrylic

-easy to apply and sand (after approx. 6 h drying time).

-has excellent filling poweron various types of joinery such as doorframes, doors, windows, etc...and good protection sharp edges.

-fast dryingallows application of several coatsin one day.

-can isolate* water-soluble stains such as old dampness stains, nicotine stains, etc.

-high covering power.

-is vapour permeable and unsaponifiable.

SUBSTRATES AND SYSTEMS PAINT SYSTEMS

MULTIPRIMER AQUA PROTECT can be applied to most substrates encountered in the building industry, after adequate preparation. preparation. The substrate must be sound, dry, consistent, grease-free and clean.

Substrate preparation:

No painted:

- Washand/or degrease with POLYFILLA PRO S600Allow to dry and remove dust.

- Non-horizontal exterior parts or interior joineryApply a coat of MULTIPRIMER AQUA PROTECT diluted up to max. 10% with water water for optimum penetration. Exterior joinery with horizontal parts: apply one coat of SILVANOL LM(see technical data sheet)or PERMALINE PRIMERor PERMALINE SNELGROND.

- Tropical woods: apply two coatsundilutedes of MULTIPRIMERAQUA PROTECT with at least 18 hours between coats. coatsor 1 coat of PERMALINE PRIMERor PERMALINE SNELGROND.

- Galvanized steel, non-ferrous metals, hard PVC: degrease with SYNTHETIC THINNER.

Previously painted surfaces in good condition:

- Remove old coats, washand/or degrease with POLYFILLA PRO S600allow to dry and remove dust.

OldPainted surfaces in poor condition:

- Joinery: remove old coats of paint by sanding, scraping or stripping, then fix with ae coatof MULTIPRIMER AQUA PROTECTdilutedeup to max. 10% water.

Ferrous metals:

- A interior: touch up rusted areas after derusting with 2 coats of MULTIPRIMER AQUA PROTECT with a delay of min. 18 hours.

-Outside: touch up rusted areas after derusting with STELOXINE PRIMER FERRO.

Finish

-Apply1 or 2 coats of MULTIPRIMER AQUA PROTECTbefore starting the chosen finishing system.

*Note

-To isolate water-soluble stainsapply two undiluted coats with at least 18 hours between coats. coats