Français
Nederlands
Multiprimer Aqua Protect
Multiprimer Aqua Protect is a universal, water-based, rust-proofing and insulating acrylic primer for interior and exterior use.
- Multiprimer Aqua Protect has exceptional adhesion to a wide range of substrates, including wood, ceilings, cement, brick and concrete, as well as hard PVC piping, polyester, recoverable hard plastics, polycarbonate, ceramics, galvanized metal, glass, glass fibre, glass fibreglass, glass fibreglass, glass fibreglass, glass fibreglass and glass fibreglass. polycarbonate, ceramics, galvanized metal, zinc, aluminium, glass, tiles (after degreasing with acetone), etc., ... Can also be used as an adhesion primer on old varnish or enamel layers, after matting.
- Can isolate water-soluble stains such as old damp, nicotine stains, etc.
- Self-crosslinking acrylic emulsion
- is easy to apply and sand (after approx. 6 h drying time).
- has excellent filling power on a wide range of joinery such as door frames, doors, windows, etc., and good protection of sharp edges.
- fast-drying, allowing several coats to be applied in a single day.
FEATURES-USE
-has exceptional adhesion to a variety of substratessuch as wood, ceilings, cement, brick and concrete, but also hard PVC pipes, polyester, coatable hard plastics, polycarbonate, ceramics, galvanized galvanized metal, zinc, aluminium and glass, tilesage( after degreasing with acetone) etc., ... Also suitable as as an adhesion primer on old coats of varnish or enamel, after matting.l, after matting.
-overcoatable with acrylic and alkyd enamels
-Self-crosslinking emulsion acrylic
-easy to apply and sand (after approx. 6 h drying time).
-has excellent filling poweron various types of joinery such as doorframes, doors, windows, etc...and good protection sharp edges.
-fast dryingallows application of several coatsin one day.
-can isolate* water-soluble stains such as old dampness stains, nicotine stains, etc.
-high covering power.
-is vapour permeable and unsaponifiable.
SUBSTRATES AND SYSTEMS PAINT SYSTEMS
MULTIPRIMER AQUA PROTECT can be applied to most substrates encountered in the building industry, after adequate preparation. preparation. The substrate must be sound, dry, consistent, grease-free and clean.
Substrate preparation:
No painted:
- Washand/or degrease with POLYFILLA PRO S600Allow to dry and remove dust.
- Non-horizontal exterior parts or interior joineryApply a coat of MULTIPRIMER AQUA PROTECT diluted up to max. 10% with water water for optimum penetration. Exterior joinery with horizontal parts: apply one coat of SILVANOL LM(see technical data sheet)or PERMALINE PRIMERor PERMALINE SNELGROND.
- Tropical woods: apply two coatsundilutedes of MULTIPRIMERAQUA PROTECT with at least 18 hours between coats. coatsor 1 coat of PERMALINE PRIMERor PERMALINE SNELGROND.
- Galvanized steel, non-ferrous metals, hard PVC: degrease with SYNTHETIC THINNER.
Previously painted surfaces in good condition:
- Remove old coats, washand/or degrease with POLYFILLA PRO S600allow to dry and remove dust.
OldPainted surfaces in poor condition:
- Joinery: remove old coats of paint by sanding, scraping or stripping, then fix with ae coatof MULTIPRIMER AQUA PROTECTdilutedeup to max. 10% water.
Ferrous metals:
- A interior: touch up rusted areas after derusting with 2 coats of MULTIPRIMER AQUA PROTECT with a delay of min. 18 hours.
-Outside: touch up rusted areas after derusting with STELOXINE PRIMER FERRO.
Finish
-Apply1 or 2 coats of MULTIPRIMER AQUA PROTECTbefore starting the chosen finishing system.
*Note
-To isolate water-soluble stainsapply two undiluted coats with at least 18 hours between coats. coats
| Destination | Walls and Ceilings |
|---|---|
| Aspect & Shine | Velvety |
| VOC | > 30 gr/L |
| Packaging | 1L |