Sigma Sigmacryl Decor Satin white

Description

• High-quality, solvent-free, decorative satin paint for interiors, based on water-dispersed copolymers.

Use

For painting more or less porous and breathable, completely dry and stabilized mineral substrates such as ceilings, masonry, concrete, cement and film coatings.
Also suitable for gypsum board, fiberglass fabric, plaster and wallpaper.
Recoating old, well-adhering coats of wall paint.

Main characteristics

• Odorless, solvent-free and free of organic emissions
• Highly washable (class 1, EN13300)
• Very easy to apply
• Low-tension, breathable film
• Very high covering and filling power
• No splattering
• Premises can be put into service immediately after painting
• Contains less than 1g/l of VOCs

Coverage

• Practical: 8-9 m²/liter
  The practical yield depends on various factors, such as the structure of the substrate, the condition and shape of
  the object, the application method, the experience of the applicator, as well as atmospheric conditions.

Substrate conditions

New (untreated) substrates
Must be sufficiently bonded, dry (green indication on protimeter) and clean until a sound substrate is obtained.
For mineral substrates max. 4% moisture content. For gypsum-based substrates max. 1%.
Finishing on insufficiently dry and hardened substrates may lead to embus (due to efflorescence
alkaline).
Carry out repairs using lime-free products such as e. g.
Pre-treat powdery, highly absorbent substrates with Sigmafix Universal (dilution according to substrate, see
data sheet 8205).
For further information on pre-treating and/or fixing walls, see data sheet FI1333.

Old water-based dispersion substrates
Adherent, sound, clean with ammonia water and then allow to dry thoroughly.

Old alkyd paints
Adherent, sound, clean with ammonia water and then allow to dry thoroughly.
Sand off alkyd paints.