Trimetal Globaprim Hydro

Features and benefits

• can be applied to inconsistent substrates such as concrete, cement, bricks, old paintwork, smooth substrates such as smooth concrete, clinkers, limestone bricks, etc.
• Opacifying primer.
• significantly reduces the porosity of new or absorbent substrates. Provides a sound base for finishing with latex or acrylic paints or decorative plasters.
• is microporous and does not impede vapour diffusion of finishing coats.
• allows easy substrate preparation, maximizes adhesion and increases the durability of applied systems.
• can be applied to previously painted substrates and can be overcoated with most dispersion paints.
• Slightly granular.
• Low odor.
• Unsaponifiable.

SUBSTRATES AND PAINT SYSTEMS

GLOBAPRIM HYDRO can be applied to all sound, dry, coherent exterior hydraulic substrates, after appropriate preparation according to the substrate to be treated. Remove saltpetre and dirt by brushing with a stiff brush.

Substrate preparation

laitance and saltpetre
- Brush dry with a hard brush.

Substrates characterized by the presence of moss, algae or fungi
- Treat with POLYFILLA PRO S705, allow to act for at least 24 hours (if necessary
- repeat treatment). Brush dry to remove any residues of greenery, mould and algae.
- Rinsing is not necessary, as it prolongs the effect.

New, porous or inconsistent substrates and aerated concrete
- Remove dust and apply a coat of GLOBAPRIM HYDRO.

Previously painted substrates
- Old, floury coats of paint: fix with GLOBAPRIM HYDROFIX or GLOBAPRIM FIX
- Renovation: remove loose particles, wash off old coats, roughen and remove dust, apply a coat of GLOBAPRIM HYDRO.

Walls treated with whitewash
- Brush and apply 1 to 2 coats of GLOBAPRIM HYDROFIX or GLOBAPRIM FIX depending on thickness.

Chipped paint
- Scrape and brush before applying GLOBAPRIM HYDROFIX.

Finishing
- GLOBAPRIM HYDRO can be overcoated with dispersion paints and plasters.

Note
To fix powdery substrates, use GLOBAPRIM HYDROFIX or GLOBAPRIM FIX.

DIRECTIONS FOR USE

Drying time at 20°C and 60% R. H.

• Dry: 1 h
• Recoatable: 5h

Application conditions

• Substrate temperature: Min. 10°C
• Ambient temperature : Min. 10°C
• Max. relative humidity : 75%

Application and dilution

• Brush and roller
  Ready to use
  
  
• Equipment cleaning
  With water

TECHNICAL CHARACTERISTICS

• Appearance
  Matte and grainy
  
  
• Shades
  White
  
  
• Packaging
  5 L - 10 L
  
  
• Tinting
  Via TRIMETAL ACOMIX tinting machine
  
  
• Density at 20°C
  1.44 ± 0.05
  
  
• Theoretical coverage
  6 to 8 m2/l depending on substrate roughness and porosity
  
  
• Physical values to DIN EN 1062
  G3E2S1V1A0C0
  
  
• Gloss
  G3 matt