Trimetal Magnacryl White ceiling

Features and benefits

• is a high-quality, acrylic-copolymer-based, waterborne, extra-matte paint for decorative work on ceilings of all kinds: ceilings, plaster, plaster derivatives, concrete, etc.
• is recommended for backgrounds that are uneven when exposed to grazing light. Its perfectly matte appearance simplifies plastering work and results in a uniform, clump-free finish.
• Its high covering power reduces the number of coats: 1 x primer and 1 x finish, resulting in a favorable yield.
• High whiteness
• Long open time - ideal for avoiding rework in combination with the extra-matte appearance. Even when working on large surfaces or ceilings.
• Very easy/pleasant to apply
• Good tension. Good aesthetic appearance
• Odorless and fast-drying, minimizing downtime.
• Meets class 2 for wet rub resistance according to EN 13300.
• Meets class 2 opacity for a specified yield of 8 to 11 m²/l.
• is SF quality (= free from solvents and organic emissions, or no adverse effects on indoor air quality).
• does not contain plasticizers
• Indoor air emission or IAQ: A+.
• Contains less than 1 g/l of VOCs
• Non-yellowing
• Vapor permeable
• Unsaponifiable

DIRECTIONS FOR USE

Drying time at 20°C and 60% R. H.

• Dust dry: 1h
• Dry : 1h
• Recoatable: 6h
  24h if water-soluble substances are present in the substrate.

Application conditions

• Substrate temperature: Min. 10°C
• Ambient temperature : Min. 10°C - max. 30°C
• Max. relative humidity : 80%
• Theoretical coverage: 8 to 11 m²/l per coat

Application and thinning

• Brush and roller
  Ready to use.
  
  
• Airless spray gun
  Pressure: 160 - 180 bar
  Opening: 0.019 - 0.021 inch
  
  
• Conventional spraying
  Dilute with up to 10% water
  Opening: 1.8 - 2.2 mm
  
  
• Equipment cleaning
  With water, immediately after use