Trimetal Silvatane PU Acrylic Mat colorless

FEATURES-USE

• recommended for embellishing and protecting interior woodwork.
• is completely colorless and non-yellowing, allowing wood to retain its natural appearance.
• as a mattresistance to wear and stains.
• is odorless and fast-drying, allowing several coats to be applied per day.
• is also suitable for mineral substrates and can be used as a finish over acrylic paints in interior applications. This leur provides enhanced protection, washability and scratch resistance.
• IAQ or emission in the'indoor air : A+

SUPPORTS AND SYSTEMSPAINT

SILVATANE PU ACRYL MAT should be applied to completely dry, sound, clean wood or suitably prepared surfaces.

Finishion

Interior joinery:

• Bare wood: apply 1 coat of SILVATANE PU ACRYL GLOSSdiluted with 10% water followed by two coats of SILVATANE PUACRYL MATundiluted.
• Previously varnished wood: apply 1 to 2 coats of SILVATANE PU ACRYL MATundiluted.
• As a finish on acrylic or vinyl paints indoors: apply 1 to 2 coats of SILVATANE PU ACRYL MAT, undiluted.

Note SILVATANE PU ACRYL MAT must be thoroughly mixed by hand before and during use , until it ishomogeneous.

DIRECTIONS FOR USE

Dryingtime: Dry 20 minutes | Recoatable min. 4 hours

Application and thinning:Synthetic long-bristle brush / Mohair, felt or modacryl roller. Ready to use.

Cleaning equipment : With water

COMPOSITION

Binder : Resins acryl-polyurethane resins

VOC: This product contains a maximum of 100 g/l VOC

Appearance: Matt (7 GU at 60°).

STORAGE-SHELF LIFEN

Store preferably frost-free and covered in unopened original packaging, at at temperatures between 5°C and 35°C.At least 24 months under normal mentionnées.